Each LMI cartridge is carefully made and inspected to ensure the performance, price, and sustainability you expect from North America’s #1 choice for quality aftermarket consumables.

R2 Certified Remanufacturing Highlights:

• Inspect all incoming cores looking for damaged plastic, leaks and general conditions
• Separate by type and recycle out any cores with signs of damage
• Completely disassemble cartridge down to individual component level
• Remove all remaining supply side toner and waste toner using dried and highly filtered compressed air. Toner is
  collected into 12,000cfm Torit dust collector and invincible high flow vacuum system
• Gears and contacts cleaned in ultrasonic bath cleaners
• PCRs, doctor blades and magnetic rollers checked then cleaned / recoated or replaced depending on cartridge
• Check alignment of all retention blades and replace if necessary
• Replace sealing felts for magnetic developer roller
• Check all shims, gear posts, shutter tabs, shutter arms, alignment pins, etc. for damage or wear
• Split cartridge and install seal. Replace and/or add extra foam to provide additional leak protection and improve
  cartridge integrity. Verify the hopper and mag roller section is properly aligned
• Fill with appropriate type and gram load of toner to achieve OEM yield
• Install doctor blades and developer rollers. Prime developer roller for test pages using the same lot of toner being
  used in the cartridge
• Replace drum, PCR and wiper blade. Lubricate drum and blade with appropriate semi-conductive dry powder lubricant
• Add individual barcode to each cartridge to track build team and components used
• Clean and lubricate drum axles
• Reassemble cartridge
• Inspect all screws, alignment, shutter operation, springs and spring tension
• Run 5-20 test pages in laser printer. Every cartridge tested in density, grayscale reproductions, back-grounding
  and overall print quality
• Final wipe down and application of additional powder lubricant on drum
• Final check of all tabs, shutters, screws, labels and seal tabs, etc.
• Bag in light proof, static resistant, moisture proof foil bag
• Package with appropriate inserts and wands
• Cartridge is suspended in box to protect during shipping
• Finish product logged in to tracking system with components used and technicians information